- PN 401012 8-pin amp (not included)
- PN 405028 9-pin Deutsch (not included)
PRO-LINK
The Pro-Link GRAPHIQ scan tool is designed to support all of NEXIQs heavy duty vehicle and marine applications. It provides real-time data, diagnostic information and on-screen trouble code definitions. Its designed to guide technicians through even the most complicated vehicle tests using simple menus and message screens. Pro-Links built-in flight (snap-shot feature) recorder lets you record data on test drives then review it back at the shop. The Pro-Link GRAPHIQ also has a 4-line, 20 character per line LCD display and can even help identify difficult intermittent problems. With the adjustable display the Pro-Link is easy to read in different lighting conditions. The RS-232 serial port allows you to connect the unit to the Pro-Link printer or a personal computer. The International starter kit has everything required to complete basic heavy truck diagnostic procedures.
PRO-LINK GRAPHIQ FEATURES
- Display provides 8 lines of information
- Capable of graphing 4 lines of data
- Provides real time diagnostic data
- Easy to use menus and message screens
- Multiple system capability
- Troubleshoot driveability, emission, ABS and
- body control systems
- Ready to operate in seconds
- Diagnosis for most SAE J1708/1587 electronic
engine control, ABS and transmission systems
MPC
The Multi-Protocol Cartridge (MPC) is an Intel-based Pro-LinkPlus compatible cartridge designed to diagnose todays J1708, J1939, 160 Baud and ISO 9141 vehicles. It provides a new platform that greatly enhances the flexibility of the Pro-Link Plus. To address advanced capabilities provided by the manufacturers, the MPC uses PCMCIA cards. The cards are plugged into the back of the unit, and provide additional functions unique to each manufacturer. The following list contains features and functions that are available with this cartridge.
MPC FEATURES
- Snapshot feature
- Custom data list
- Printer support
- J1708, J1939, 160 Baud, ISO 9141
- Easy application updates via RS-232 port
- Future MPC enhancement by side port
NAVPAK FEATURES
- Displays diagnostic codes in International or ATA format
- Perform diagnostic tests: injector test, output state tests, VSS tests, tach buffer test and wiggle test
- View or reprogram selected operating parameters
- The service reprogramming function allows you to use the Pro-Link Plus to download information from the vehicles ECM, send it by modem to International and load the new command file into the vehicles ECM
- Printer output allows you to print data lists, diagnostic codes, calibration data, service parameters or snapshot data
DATA DISPLAY FEATURES
- Rated horsepower
- Rated RPM
- Active codes/inactive codes
- Engine hours
- Miles
- Fuel usage
- Battery volts
- Engine oil temperature
- Ambient air
- Coolant level and temperature
- Idle set RPM
- Accelerator
- Engine RPM
- Boost PSI
- Barometric PSI
- Torque limit
- Engine load
- Injector control PSI
- Fuel gallons/hour
- Transmission shaft RPM
- Two speed axle
- Vehicle speed MPH
- Maximum speed MPH
- MPH limit
- Cruise control information
- Engine oil PSI
- PTO information
- Remote variable PTO
- Remote APS
- Retarder inhibit
- VPM information
- ECM version and checksum
