The simple to
use and permanent cooling system repair GUARANTEED to last for the life
of your engine!
For Heavy Duty
Systems up to 50 Quarts for less than 20 quarts us 8 oz bottle
Mixes with all types of Antifreeze
& Coolant
DON'T WASTE MONEY ON QUICK FIX 'GET YOU HOME' PRODUCTS. K-SEAL REALLY
IS PERMANENT
FOR THE LIFE OF YOUR ENGINE.
Save Time &
Money
Avoid time consuming and expensive mechanical repairs
which could cost you hundreds or thousands of dollars.
How Does K-Seal Work
- When there is a crack or hole in the cooling system, this
generates a low pressure area.
- K-Seal finds the low pressure area
and deposits the special ceramic micro-fibre and copper formulation as
it flows through the damaged area.
- Within seconds the crack or hole is completely filled with
the ceramic micro-fibres and copper and the repair has been made. This
seal is further enhanced by heat to form a repair that will last the
life of the engine.
K-Sealฎ
is simple to use:
- Shake bottle vigorously (at least 30 seconds) to ensure
that the contents are evenly mixed.
- Add the entire contents to the radiator or overflow tank.
(When adding K-Seal to the overflow tank, you
may pre-mix the contents with 1 to 2 quarts of water to ensure
effective dispersal into the cooling system. Allow time for the product
to enter the cooling system if you are treating a slow leak. Do not
pour K-Seal directly onto metal).
- The leak will stop within 1 to 3 minutes once the engine
has reached operating temperature.
- Top up the coolant as necessary leaving the K-Seal
in the system for future sealing. K-Seal is
compatible with all types of antifreeze.
Technical Information:
K-Seal is
formulated with ceramic micro-fibres and copper fines of varying size
to ensure a fast and permanent seal of all holes or cracks (up to 1/32
inch large) in the cooling system.
The special chemical formulation can flow into cracks so fine
that they cannot even be seen with the naked eye to form a
super-strength seal. The crack or hole is actually filled from top to
bottom with the K-Seal formula resulting in a
complete weld and permanent repair.
The copper in the K-Seal formulation
not only contributes to the strength of the repair but it also helps to
conduct heat across the crack or hole. This eliminates hot spots that
would normally form with a non-metallic repair. Copper is also very
friendly to copper, bronze and aluminium radiator cores, which makes it
safe to use with all types of radiators.
K-Seal can be left in the cooling
system and will continue to repair leaks as they happen. You wont even
notice that there was a problem. Adding K-Seal
to the cooling system immediately after each coolant replacement
ensures that any and all leaks are sealed thus preventing time
consuming and costly repairs. The standard 8oz K-Seal
will treat cooling systems of up to 50 quarts capacity.
Gaurantee is from Solv-Tec the manufacturer.
