noregontranslator
Noregon's JPRO®
DLA+ PLC Adapter is a USB interface adapter and comes
with everything you need to connect a vehicle or trailer to a PC in
order to run diagnostics on heavy duty vehicles. Works with any OEM
software application and allows users to communicate with and diagnose
ABS and other PLC and J1939/J1708/J1587 devices.
The JPRO® DLA+
PLC Trailer Brake Kit contains everything you need to connect to the PC
and the vehicle to perform J1708/J1587 diagnostics. Comes complete with
a 6 and 9 Pin Y-Cable to connect to the truck, a PLC J560 cable with
"T" connector to connect to the trailer, a USB cable to connect to the
PC, and a durable carry case to keep your adapter protected and
organized.
Comes with a 1 year limited warranty on the cables and
adapter. Extended 2 year warranty is available for an additional fee.
.
What's Included:
|
Noregon's JPRO® DLA+ PLC adapter is a USB interface
adapter and comes with everything you need to connect a vehicle or
trailer to a PC in order to run diagnostics on heavy duty vehicles.
Works with any OEM software application and allows users to communicate
with and diagnose ABS and other PLC and J1708/J1587 devices. TMC
RP1210A compliant device.
Comes with a 1 year limited
warranty on the adapter. Extended 2 year warranty is available for an
additional fee.
|
|
Manufactured
with the highest standards of quality, the 6 and 9 Pin "Dual CAN"
Y-Cable provides you with a solid connection from the truck to any
JPRO® DLA+ adapter so messages are received without delay or connection
problems. The same cable as our 6 and 9-Pin Deutsch Y-Cable, this Dual
CAN version contains extra pins that support Dual CAN communications.
Measures
3' in length.
|
|
USB Cable for
connection from your JPRO® Data Link Adapter to your PC.
Measures 15'
in length.
|
|
Noregon's PLC J560 Cable with T Connector is a 7-way
diagnostic interface adapter that allows for connecting to the
trailer's ABS system through the 7-way interface at the nose of
trailers in order to perform diagnostics.
For use with March, 2001 and later production models.
|
 |
This rugged
and
durable case is to keep your adapter and cables organized and protected
from the elements of the service bay environment. |
Supported
Applications:
The JPRO® DLA+ PLC is designed to work with any
RP1210-A compliant diagnostic application. The following applications
have been tested and are confirmed to be compatible with the Noregon
JPRO® DLA+ PLC:
- Allison — Allison DOC™ For Fleets (WTEC)
- Allison — Allison DOC™ For Fleets (1k/2k)
- Allison — Allison DOC™ For PC
- Bendix — ACom™ Tractor
- Bendix — ACom™ Trailer
- Caterpillar — CAT ET
- Cummins — INSITE™
- Detroit Diesel — DDDL
- Eaton — Service Ranger
- Freightliner — ServiceLink
- Haldex — ABS
- International — IPC Fleet
- International — INTUNE™ Fleet
- International — MD Fleet
- Meritor WABCO — TOOLBOX™
- Volvo — VCADS
- Wabash — Wabash ABS
- ZF Meritor — TranSoft
Technical
Information:
General Information
- CAN/J1939 and J1708/J1587 in a single device
- Powered via vehicle connection
- Extensible through flash firmware downloads
- Manufactured under the ISO 9001 quality
standard
- SAE J1455-compliant
- CE certified
Licensing
Capabilities
- Supports PC USB port using off-the-shelf
cabling
- Supports multi-threaded applications
- Supports CAN/J1939 and J1708/J1587
concurrently or individually
Operating System Requirements
- Windows XP or Vista Business
Minimum PC Requirements
- Pentium IV or equivalent
- 1 GB RAM
- 100 MB free hard disk space
- 1 free USB port (cable included)
Warranty
