Product Description
This is the new 126015 Blue Link Mini mobile vehicle interface made by
Nexiq Technologies. This blue link mobile enables the user to
use either your iOS or Android devices (e.g., smartphones or tablets)
to communicate with heavy duty vehicles for quick access to basic
diagnostic information. It is easy to use, simpy plug it into the
vehicle’s diagnostic connector, and provides wireless communication
with on-board electronic control units. The Blue-Link Mini is made to
be used with the First-Link mobile app, and becomes a triage
tool for drivers and service technicians of commercial vehicles and
equipment. The First-Link app provides features that help
drivers connect their mobile devices to the vehicle’s diagnostic port.
They also monitor the vehicle’s health status and increase the
vehicle’s uptime. If, for example, a Check Engine Light is illuminated,
the app assists the driver to understand the cause so that he can seek
assistance if needed (i.e., service and repair). This can be used later
back at the shop by the service technicians. They can then utilize the
information gathered by the application to aid in vehicle service and
repair. The First-Link app is available on both the App Store and on
Google Play, and must be download to the mobile device. The Blue-Link
mini comes with the integrated 9-pin Deutsch connector, and offers a
one-button design to put the device in Discovery mode. The device has a
RAM: 576 KB, and FLASH: 2.5 MB
In addition to the Nexiq Blue-Link Mini, the First-Link mobile app is
compatible with the Nexiq Blue-Link and the USB-Link 2.
The Blue-Link Mini is also compatible with the DTNA eLink app for
mobile devices (available on both the App Store and on Google Play).
Vehicle Network Protocol Support:
J1708
3 CAN Channels (CAN / J1939 / ISO15765 - 250K, 1Mb/s with Auto Baud
detection
