SKU: 852013
Nexiq 852013 Honeywell Bendix Diagnostics

DESCRIPTION:

ABS DIAGNOSTIC PC SOFTWARE

The Honeywell Bendix‚ ABS diagnostic software provides technicians with the ability to easily diagnose and service Bendix tractor and trailer ABS with a PC and NEXIQ vehicle interface. A NEXIQ heavy duty PC-to-vehicle interface device (sold separately) is required for vehicle communication. This software supports vehicles that feature Bendix ABS controllers EC-15, EC-16, EC-17, EC-30 and EC-30T. SYSTEMS COVERED

• EC-15
• EC-16
• EC-17
• EC-30/30T with PLC

FEATURES:

• Access Bendix‚ tractor and trailer diagnostic and live data parameters
• Monitor wheel speeds
• Create and save custom data lists
• Display fault codes and clear inactive codes
• Reprogram ECU / Change ABS configuration
• Scratch pad feature to enter and store service information in the ECU for future reference
• Perform a thorough and comprehensive Bendix system tests
• Snapshot recording, storage and playback
• Print data list, codes, scratch pad, system tests and snapshot data
• Windows“ 95, 98, 2000, and NT compatible

INCLUDES:

• Application CD
• Manual

BENDIX DATA LIST PARAMETERS (LIST VARIES BY ECU MODEL)

• Active codes exist
• Battery voltage
• ECU Hardware Configuration
• ECU type
• J1922 / J1939 Engine communication status
• J1939 Driveline retarder communication status
• J1939 Transmission retarder communication status
• Part number
• Product model
• Retarder relay / Engine data link status
• Revision number
• Sensor modulator configuration
• Serial number
• Solenoid state
• Traction / Warning lamp status
• Traction switch state
• Trailer communication status over J2497
• Trailer Odometer
• Trailer status on PLC
• Velocity
• Version number
• Wheel speeds (all)

BENDIX SYSTEM TESTS INCLUDE (TEST FUNCTIONS VERY BY ECU MODEL)

• ATC Valve Test
• Disable Traction Control System
• ECU LED Test
• Enable or disable serial retarder communication
• End of Line Test Functions include:
• Load Battery Voltage Test
  voltage drop when all modulators are
  energized at same time
• Modulator Sequence Test
  energizes all modulators
• Pulse (Chuff) Modulator Tests
• Reset ECU
• Retarder Relay Tests
• Save and print ABS parameters,
  diagnostic codes and system test results
• Sensor Sequence Test
  to ensure speed sensors connected properly
• Test ATC and Warning Lamps
• Test Modulators – Energizes and holds each modulator
• Torque Limit Test

NEW! POWER LINE CARRIER (PLC) TEST APPLICATION FOR TRAILER ABS*

• Compatible with Windows‚ 95, 98, 2000, NT, XP and ME
• Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU’s to communicate with the tractor ECU via the J560 power line to activate the warning lamp. NEXIQ’s PLC Converter (sold separately) is also required for PLC communication. The PLC test application is easy to use and provides the ability to:

   

• Supports all tractor/trailer ABS brake controllers equipped with
  the Power Line Communications network
• Test tractor and trailer coupled or trailer independently for
  MID messages
• Toggle in-cab trailer ABS warning lamp ON/OFF to confirm
  operation
• Verify trailer ABS ECU for MID 10 and MID 11 messages

PC TO VEHICLE INTERFACE (SOLD SEPARATELY)

• NEXIQ PLC Converter Kit – P/N 601020

  *Requires NEXIQ’s PLC converter kit sold separately P/N 601020

• NEXIQ’s HDS Lite Link Adapter for PC to Vehicle Connectivity P/N 551004
• NEXIQ’s Parallel Port Module (PDM) for PC to Vehicle Connectivity– P/N: 126032