- This bearing extractor kit is perfect for removing bearings without the need to dismantle machinery or remove the running shaft.
- 20 to 100mm Capacity
- Positive seating allows for an even tension on the inner and outer bearing rings, reducing friction and resistence.
- Three pairs of ball type extractor heads are included
- Sizes: 5.5 mm, 6mm, 7.5 mm
- Cross Block Length: 4.3/8"(110mm) Main Pulling Rods: 4"(100mm) Spread: 1" to 3.3/4"(25 to 95mm) Reach: 4.11/32"(110mm)