- 40 to 110mm Capacity
- This bearing extractor kit is perfect fpr removing bearings without the need to dismantle machinery or remove the running shaft
- Positive seating allows an even tension on the inner and outer bearing rings, reducing friction and resistence.
- Three pairs of ball type extractor heads are supplied. Sizes: 9mm, 11mm, 12.5mm
- Cross Block Length: 5.1/2"(140mm)
- Main Pulling Rods: 8"(200mm)
- Forcing Screw: 5/8"UNF x 18tpi x 8.1/2"(215mm)
- Long Spread: 1.9/16" to 4.11/32"(40 to 110mm)
- Reach: 16.3/8"(415mm)