- A full kit for most makes or model motorcycle repair jobs
- Blow Mold Case for easy storage
- Makes any job easier with a full set of parts needed at your finger tips
- 1 Year warranty
- Kit includes:
- Crank case Installer (10x1.25, 12x1.25mm nuts)
- Drive Chain Breaker (3-22mm) pin Dia. 3.5-6mm
- Universal Flywheel/ Clutch Holding Tool
- Magneto Flywheel Puller 28x1.0mm (r-hand)
- Magneto Flywheel Puller 1-1/16" 27x1.0mm (l-hand)
- Magneto Flywheel Puller 15/16" 24x1.0mm (r-hand)
- Magneto Flywheel Puller 5/8" 16x1.5mm (r-hand)
- Magneto Flywheel Puller 9/16" 14x1.5mm (r- hand)
- Speedometer Front Wheel Gear Nut Socket
- 3pc. Tappet Adjusting Tool (8 and 9 mm)
- Clutch Nut Socket (22mmdis. 4 Pins)
- Clutch Nut Socket (23mm dia. 4Pins)
- Valve Spring Collet Remover / Replacer
- D/Ended Steering Lug Nut Hook Wrench
- Screwdriver with ¼ Hex Bit Holder
- T Handle with ¼ Hex Bit Holder
- 10mmx ¼ Hex x 4" 100mm Deep Socket, 8mmx ¼ Hex x 4" 100mm Deep Socket
- ½ SQ. Drive x ¼ Hex Bit Holder
- #2 Phillips x 6mm Slotted x 4" 100mm ¼ Hex Bit, #3 Phillips D/End x 100mm ¼ Hex Bit, 5mm,6mm Hex D/End x 4" 100mm ¼ Hex Bit, 4mm, 5mm Hex D/End x 8" 200mm ¼ Hex Bit, #2 Phillips D/End x 8" 200mm ¼ Hex Bit, #3 Phillips D/End x 12" 300mm ¼ Hex Bit.