Blog
Why the W470589004300 Rear Seal Remover & Installer is Mandatory for Detroit DD13, DD15 & DD16 Service
Prevent crankshaft flange scoring, oil-soaked clutches, and PTFE seal lip damage on Detroit Diesel DD13, DD15 & DD16 engines.
Servicing rear main crankshaft oil seals on Detroit Diesel DD13, DD15, and DD16 commercial heavy-duty engines? Attempting to pry out worn rear main seals using heel bars, screwdrivers, or slide hammers—or tapping new OEM PTFE (Teflon) seals into flywheel housings with brass drifts and hammers—causes catastrophic crankshaft flange scoring and immediate crankcase oil leaks. On Detroit DD13, DD15, and DD16 engines, modern rear main oil seals (such as OEM seals A4729970046 and A0159974946) utilize precision-engineered PTFE sealing lips and integrated wear sleeves. Prying against the crankshaft flange gouges microscopic axial grooves into the polished steel running land, creating permanent oil leak paths that soak heavy-duty clutch discs or torque converters. Equally destructive, hammering a new PTFE seal into place cocks the outer casing out of round, distorts lip crush geometry, and breaks the delicate PTFE lip before the transmission is even bolted back up. Engineered for professional commercial diesel technicians, Detroit Diesel dealership service stalls, fleet maintenance facilities, and heavy engine rebuilders as a direct high-strength replacement for OEM tool number W470589004300, the W470589004300 Rear Crankshaft Seal Remover & Installer provides a 10.00-pound precision-machined extraction bridge and guided press driver assembly—delivering 100% continuous, centered axial force to pull worn rear seals safely and seat new DD13/DD15/DD16 rear main seals flush to exact OEM depth.
The Critical Physics of Axial Extraction & Built-In Depth-Stop Press Seating
On Detroit Diesel DD13, DD15, and DD16 engines, the rear crankshaft seal must be extracted straight backward along the crankshaft axis and pressed forward squarely into the flywheel housing bore. The W470589004300 master kit (ATCW470589004300) accomplishes both operations using precision-guided threaded extraction and press fixtures that bolt directly to the crankshaft flange. During removal, the extraction bridge anchors to the crank flange while threaded puller bolts engage the old seal casing—turning the central forcing screw draws the worn seal smoothly out without ever touching the crankshaft nose or housing bore. During installation, the guided press driver disc centers on the crankshaft pilot studs, pressing the new dry PTFE seal evenly around 360 degrees until the driver bottoms firmly against its built-in depth stop shoulder—guaranteeing exact factory seal depth, concentricity, and lip crush geometry.
- Targeted Detroit DD13, DD15 & DD16 Fitment – Purpose-built specifically for rear crankshaft main oil seal removal and installation on Detroit Diesel DD13, DD15, and DD16 engines.
- Direct Detroit OEM Tool Interchange – Direct high-strength replacement for factory Detroit Diesel tool number **W470589004300** (ATCW470589004300 / W 470 589 00 43 00).
- Dual-Function Extraction & Depth-Stop Installation – Complete fixture assembly pulls worn seals axially and presses new PTFE/elastomeric seals (A4729970046 / A0159974946) to exact factory depth.
- Protects Crankshaft Flanges & Housing Bores – Eliminates prying scratches, seal lip rolling, and uneven cocking that cause oil-soaked clutches and comeback teardowns.
- Substantial 10.00 lbs Heavy-Duty Alloy Steel Build – Precision-machined, heat-treated structural alloy tool steel built for continuous daily shop use in high-volume rebuild bays.
Stop Prying Rear Main Seals. Command Total Detroit DD13/DD15/DD16 Service Precision.
The W470589004300 Rear Crankshaft Seal Remover & Installer – Detroit Diesel DD13/DD15/DD16 is an essential capital asset for commercial truck repair centers, Detroit Diesel dealership service stalls, fleet maintenance facilities, and heavy engine rebuilders. Prevent oil-soaked clutches, eliminate crankshaft flange scoring, and service DD13, DD15, and DD16 rear main seals with complete mechanical authority using Apex tools.
10.00 lbs Precision Guided Detroit DD13/DD15/DD16 Rear Main Seal Remover & Installer Kit. Protect Crankshafts.
Order the W470589004300 Kit – $325.00Technical Specifications
| Technical Metric | Value / Fitment Reference Guidelines |
|---|---|
| Target Engine Platforms | Detroit Diesel DD13, DD15, and DD16 Heavy-Duty Diesel Engines |
| Primary Operational Functions | Safe mechanical extraction of worn rear main oil seals and precision press installation of new seals |
| Specialty Tool Cross Reference | Direct OEM replacement for Detroit Diesel tool number W470589004300 (ATCW470589004300) |
| Seal Material Compatibility | OEM PTFE (Teflon) and elastomeric rear crankshaft main oil seals (A4729970046, A0159974946) |
| Kit Contents Architecture | Extraction Puller Bridge Assembly, Guide Studs/Pins, Central Forcing Screw/Nut, and Guided Press Driver Disc |
| Part / Model Reference Number | W470589004300 (ATCW470589004300 / W 470 589 00 43 00) |
| Construction Metallurgy | High-tensile precision-machined, heat-treated structural alloy tool steel |
| Total Package Shipping Weight | 10.00 lbs (Heavy-duty master engine service shop tool) |
overall rating:
my rating:
log in to rate