Professional Tech Tips: Installing Rear Main Seals on Case & New Holland F4A Engines
Master the F4A crankshaft service. Learn the proper procedure for using the 380000664 installer to prevent leaks and protect your engine.
The 380000664 Solution for Heavy Equipment
When you are working on a Case IH tractor or a New Holland backhoe with the F4A engine, the "rear main" is a critical point of failure. Accessing this seal requires splitting the machine or removing the transmission—a massive job. Using the 380000664 / 99346253 professional installer isn't just a suggestion; it's insurance against unpaid rework.
Proper Installation Steps
- Surface Inspection: Ensure the crankshaft flange is free of grooves, nicks, or old sealant.
- Dry Install: Most F4A seals are PTFE. Do not lubricate the seal lip or the crankshaft; they must be installed dry unless the seal manufacturer specifically states otherwise.
- Tool Mounting: Thread the guide studs of the 99346253 into the crankshaft.
- Seal Placement: Slide the new seal over the guide and onto the crankshaft start.
- The Press: Use the installer plate and nut to slowly and evenly draw the seal into the housing until the tool bottoms out.
Why Shop Owners Choose Apex Industrial
THE APEX ADVANTAGE:
Our tools are engineered to meet or exceed OEM performance. With a shipping weight of over 14 lbs, the 99346253 is a substantial piece of hardware designed for the high-torque environment of a professional diesel shop. Don't settle for flimsy alternatives when the integrity of an engine overhaul is on the line.
Reliability in Every Turn. Shop the 99346253 Today.
Order the Rear Main Tool